View HAT2042T_4666524.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

To all our customers
Regarding the change of names mentioned in the document, such as Hitachi Electric and Hitachi XX, to Renesas Technology Corp.
The semiconductor operations of Mitsubishi Electric and Hitachi were transferred to Renesas Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.) Accordingly, although Hitachi, Hitachi, Ltd., Hitachi Semiconductors, and other Hitachi brand names are mentioned in the document, these names have in fact all been changed to Renesas Technology Corp. Thank you for your understanding. Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been made to the contents of the document, and these changes do not constitute any alteration to the contents of the document itself. Renesas Technology Home Page: http://www.renesas.com
Renesas Technology Corp. Customer Support Dept. April 1, 2003
Cautions
Keep safety first in your circuit designs! 1. Renesas Technology Corporation puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corporation product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corporation or a third party. 2. Renesas Technology Corporation assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corporation by various means, including the Renesas Technology Corporation Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corporation assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corporation semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation or an authorized Renesas Technology Corporation product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corporation is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corporation for further details on these materials or the products contained therein.
HAT2042T
Silicon N Channel Power MOS FET High Speed Power Switching
ADE-208-669F (Z) 7th. Edition Feb. 1999 Features
* * * * Low on-resistance Capable of 2.5 V gate drive Low drive current High density mounting
Outline
TSSOP-8
65 34
87
1 D
8 D
12
4 G
5 G
SS 23
SS 67
MOS1
MOS2
1, 8 Drain 2, 3, 6, 7 Source 4, 5 Gate
HAT2042T
Absolute Maximum Ratings (Ta = 25C)
Item Drain to source voltage Gate to source voltage Drain current Drain peak current Body-drain diode reverse drain current Channel dissipation Channel dissipation Channel temperature Storage temperature Note: Symbol VDSS VGSS ID I D(pulse) I DR Pch Pch Tch Tstg
Note2 Note3 Note1
Ratings 28 12 5.0 40 5.0 1.0 1.5 150 - 55 to + 150
Unit V V A A A W W C C
1. PW 10 s, duty cycle 1% 2. 1 Drive operation ; When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW 10 s 3. 2 Drive operation ; When using the glass epoxy board (FR4 40 x 40 x 1.6 mm), PW 10 s
Electrical Characteristics (Ta = 25C)
Item Symbol Min 28 -- -- 0.4 -- -- 7 -- -- -- -- -- -- -- -- -- -- -- -- Typ -- -- -- -- 0.027 0.037 11 510 190 140 8.5 4.5 4 14 120 85 120 0.85 40 Max -- 0.1 1 1.4 0.034 0.044 -- -- -- -- -- -- -- -- -- -- -- 1.1 -- Unit V A A V S pF pF pF nc nc nc ns ns ns ns V ns IF = 5.0 A, VGS = 0 Note4 IF = 5.0 A, VGS = 0 diF/ dt = 20 A/ s Test Conditions I D = 10mA, VGS = 0 VGS = 12 V, VDS = 0 VDS = 28 V, VGS = 0 VDS = 10 V, I D = 1 mA I D = 3 A, VGS = 4 V Note4 I D = 3 A, VGS = 2.5 V Note4 I D = 3 A, VDS = 10 V Note4 VDS = 10 V VGS = 0 f = 1 MHz VDD = 10 V VGS = 4 V ID = 5 A VGS = 4 V, ID = 3 A VDD 10 V Drain to source breakdown voltage V(BR)DSS Gate to source leak current Zero gate voltege drain current Gate to source cutoff voltage Static drain to source on state resistance Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate to source charge Gate to drain charge Turn-on delay time Rise time Turn-off delay time Fall time Body-drain diode forward voltage Body-drain diode reverse recovery time Note: 4. Pulse test I GSS I DSS VGS(off) RDS(on) RDS(on) |yfs| Ciss Coss Crss Qg Qgs Qgd t d(on) tr t d(off) tf VDF t rr
HAT2042T
Main Characteristics
Power vs. Temperature Derating 2.0 Pch (W) I D (A) Test Condition : When using the glass epoxy board (FR4 40x40x1.6 mm), PW < 10 s 1.5 Maximum Safe Operation Area
10 s
100 30 10 3
100 s
DC
Channel Dissipation
Drain Current
Op
PW
er at ion (P
1
m
s
=
1.0
1 0.3 0.1 0.03
10
2 ive Dr
m
s
1
0.5
Dr
ive
Op
Operation in this area is limited by R DS(on) Ta = 25 C
W
< Note 1 0
e Op ra tio n
s) 5
er
at
ion
150 Ta (C) 200
0
50
100
Ambient Temperature
0.01 1 shot Pulse 0.1 0.3 1 3 10 30 100 Drain to Source Voltage V DS (V) Note 5 : When using the glass epoxy board (FR4 40x40x1.6 mm)
Typical Output Characteristics 10 10V I D (A) 8 4V 6 1.5 V Pulse Test I D (A) 10
Typical Transfer Characteristics
8
Drain Current
Drain Current
6 -25C 4 25C 2 Tc = 75C V DS = 10 V Pulse Test 0 1 2 3 Gate to Source Voltage 5 4 V GS (V)
4
2 VGS = 1.0 V 0 1 2 3 Drain to Source Voltage 4 5 V DS (V)
HAT2042T
Drain to Source Saturation Voltage vs. Gate to Source Voltage
V DS(on) (V)
Static Drain to Source on State Resistance vs. Drain Current
Drain to Source On State Resistance R DS(on) ( )
0.2
0.25
Pulse Test
Pulse Test
0.1 0.05
0.20
2.5 V
Drain to Source Voltage
0.15
0.02
0.10
ID=5A
VGS = 4 V
0.01
0.05
2A 1A
0.005
0.002
0
2 4 6 Gate to Source Voltage
8 V GS (V)
10
0.2
0.5 1 2 Drain Current
5 10 I D (A)
20
Static Drain to Source on State Resistance R DS(on) (m )
Forward Transfer Admittance |yfs| (S)
Static Drain to Source on State Resistance vs. Temperature 100
50
Forward Transfer Admittance vs. Drain Current
80 I D= 5 A VGS = 2.5 V 40 2A
1A
20 10 5
Tc = -25 C
60
75 C 25 C
5, 2, 1 A 20 0 -40 4V Pulse Test 0 40 80 120 160 Case Temperature Tc (C)
2 1 0.5 0.2 V DS = 10 V Pulse Test 0.5 1 2 5 10 20
Drain Current I D (A)
HAT2042T
Body-Drain Diode Reverse Recovery Time Typical Capacitance vs. Drain to Source Voltage VGS = 0 f = 1 MHz
500
Reverse Recovery Time trr (ns)
10000 3000 1000
100 50
Capacitance C (pF)
200
Ciss 300 Coss 100 Crss 30 10
20 10 5 0.1 di/dt = 20 A/s V GS = 0, Ta = 25C 0.2 0.5 1 2 Reverse Drain Current 5 I DR (A) 10
0
10
20
30
40
50
Drain to Source Voltage V DS (V)
Dynamic Input Characteristics
V DS (V)
Switching Characteristics
V GS (V)
50 I D = 5.0 A 40 V DD = 5 V 10 V 25 V
10
1000 500
Switching Time t (ns)
V GS = 4 V, V DD = 10 V PW = 3 s, duty < 1 %
8 V GS 6
Drain to Source Voltage
30 V DS 20
Gate to Source Voltage
200 100 50 tf tr t d(on) 0.2 0.5 1 Drain Current 2 5 I D (A) 10 t d(off)
4
10
V DD = 25 V 10 V 5V 4 8 12 16 Gate Charge Qg (nc)
2 0 20
20 10 0.1
0
HAT2042T
Reverse Drain Current vs. Souece to Drain Voltage 10 Pulse Test Reverse Drain Current I DR (A) 8
6 5V V GS = 0 V
4
2
0
0.4
0.8
1.2
1.6
2.0
Source to Drain Voltage
V SD (V)
Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 4V 50 V DD = 10 V Vout Monitor
Switching Time Waveform 90% 10% 10% 90% td(on) tr 90% td(off) tf 10%
Vout
HAT2042T
Normalized Transient Thermal Impedance vs. Pulse Width ( 1 Drive Operation) 10 Normalized Transient Thermal Impedance s (t)
1
D=1 0.5
0.1
0.2
0.1
0.05
0.01
0.02 0.01
p ot sh 1 uls e
ch - f(t) = s (t) * ch - f ch - f = 166 C/W, Ta = 25 C When using the glass epoxy board (FR4 40x40x1.6 mm)
PDM PW T
0.001
D=
PW T
0.0001 10
100
1m
10 m
100 m
1
10
100
1000
10000
Pulse Width PW (S)
Normalized Transient Thermal Impedance vs. Pulse Width ( 2 Drive Operation) 10 Normalized Transient Thermal Impedance s (t)
1
D=1 0.5
0.1
0.2
0.1
0.05
0.01
0.02 0.01
ch - f(t) = s (t) * ch - f ch - f = 210 C/W, Ta = 25 C When using the glass epoxy board (FR4 40x40x1.6 mm)
e uls
PDM PW T
0.001
D=
tp ho 1s
PW T
0.0001 10
100
1m
10 m
100 m 1 10 Pulse Width PW (S)
100
1000
10000
HAT2042T
Package Dimensions As of January, 2001
Unit: mm
3.00 3.30 Max 8 5 4.40 1 *0.22 +0.08 -0.07 4 0.65 1.0 0.13 M 0.805 Max *0.17 0.05 0.15 0.04 1.10 Max 6.40 0.20 0 - 8 0.50 0.10 0.20 0.06
0.10
0.07 +0.03 -0.04
*Dimension including the plating thickness Base material dimension
Hitachi Code JEDEC EIAJ Mass (reference value)
TTP-8D -- -- --
HAT2042T
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica Europe Asia Japan
: : : :
http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm
Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00, Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road, Hung-Kuo Building, Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon, Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://www.hitachi.com.hk
For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585160
Copyright (c) Hitachi, Ltd., 2000. All rights reserved. Printed in Japan.
Colophon 2.0

▲Up To Search▲

Price & Availability of HAT2042T

	To Download HAT2042T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .